Hunt and Fish Finders - View Single Post

birdman · 02-13-2008

Wes,

I would imagine you could find some aftermarket screws that would merely go through your head liner (1/4"-3-8"). If not, i've seen people make them with about a 2.5 foot section of velcro tape. Screw one side of tape to the headliner and velcro them in. When done this way, they are way less obtrusive then the plastic racks. If your headliner is too thin for screws, you could also just drop your liner and put a lock washer and nut on the topside and replace.

02-13-2008	#2 (permalink)
birdman Administrator Join Date: Jun 2004 Location: Longmont, Co Posts: 573 Images: 6	Wes, I would imagine you could find some aftermarket screws that would merely go through your head liner (1/4"-3-8"). If not, i've seen people make them with about a 2.5 foot section of velcro tape. Screw one side of tape to the headliner and velcro them in. When done this way, they are way less obtrusive then the plastic racks. If your headliner is too thin for screws, you could also just drop your liner and put a lock washer and nut on the topside and replace. __________________ "I don't care how or what you hunt or fish, I'm the outdoor equal opportunist"